Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Return to Main Site
  • Contact Us
  • Dealer Login
  • Home
  • Products
  • Radar
  • FAR-2xx8
  • Frequently Asked Questions

FAR-2xx8 : What is the Maximum Antenna Cable length?

FAR-2218 FAR2218 FAR-2228 FAR2228 FAR-2238S FAR2238S FAR-2238S-NXT FAR2238NXT FAR-2318 FAR2318 FAR-2318 FAR2318 FAR-2328 FAR2328 FAR-2328W FAR2328W FAR-2338SW FAR2338SW FAR-2338S FAR2338S FAR-2338S-NXT FAR2338SNXT

Written by Ian Upham

Updated at November 24th, 2021

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Latest News
  • Products
    Radar ECDIS VDR TimeZero NavNet TZT NavNet MFD Chart Plotter GPS AIS Communication Echo Sounder Sonar Fish Finder Multi Beam Sonar Current Indicator Compass Autopilot Speed Log BNWAS Instruments Monitors & Displays Envision AR System Power Supply Unit Interfaces
  • Type Approval Certs
+ More

What is the Maximum Antenna Cable length?

When using the standard supply Antenna cable (RW-00135), the maximum cable length is 80M

There are options available to extend this distance as detailed in the below table :


MAX Length Cable Type Remarks
Antenna > RPU-025 80M RW-00135 -
Antenna > RPU-025 100M RW-9600 LAN Signal Convertor Kit required
Antenna > RPU-025 460M RW-9600 + Ships cables LAN Signal Convertor Kit required + 2 x RJB-001 Junction boxes


What is a LAN Signal Convertor Kit?

The LAN Signal convertor allows the use of the older RW-9600 antenna cable, perfect for retro-fits and cases where you need to extend the distance between the Antenna & RPU-025 beyond 80M.

The LAN Signal Convertors are installed inside the Antenna and RPU-025.

There are different types of LAN Signal Convertor Kits depending on the type of Antenna :

RADAR Convertor Kit
X-Band Magnetron OP03-247-3
X-Band Solid State (NXT) OP03-247-4
S-Band Magnetron OP03-247-2
S-Band Solid State (NXT) OP03-247-1


If the distance between the Antenna & RPU-025 does not exceed 100M, you can wire the RW-9600 directly into the respective units. 


If the distance between the Antenna & RPU-025 does exceed 100M, you will need to use 2 x RJB-001 Junction boxes and Ships supply cables : 

  • RW-9600 cable between the Antenna & RJB-001 
  • RG-12/UY & 3 x DPYCY-6 Ships cable between the 2 x RJB-001 
  • RW-9600 cable between Processor & RJB-001


Are there any other Maximum cable lengths to consider? 


MAX Length Remarks
RPU-025 > Display unit 10M DVI-D
RPU-025 > Control unit 5M USB
RPU-025 > Control unit 30M Standard will 2.3M
10/20/30 M cables available as optional extras




Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • FAR-2xx8 : How to carry out Tune Initialize
Portsmouth
West Building
Penner Road
Havant, Hampshire
PO9 1QY

Tel: 02392 441000
Email: sales@furuno.co.uk
Fraserburgh
South Breakwater
Fraserburgh
Aberdeenshire
AB43 9TD

Tel: 01346 518300
Email: sales@furuno.co.uk
> Furuno International
> Navnet Brochure
> General Brochure


> Privacy Policy
FacebookInstagramLinkedinYoutube
© 2021 Copyright © FURUNO (UK) LTD. All Rights Reserved.

Knowledge Base Software powered by Helpjuice

Definition by Author

0
0
Expand